7406 Instant Glue One-Part, Low Viscosity, Surface-Insensitive, Suitable Porous, Acidic, And Absorbent Inert Materials.

Huitian®7406is one component, low viscosity, surface-insensitive, universal cyanoacrylate.Typical ApplicationBonding of porous, acidic, and absorbent inert materials.Properties before curingTypical Value                         RangeAppearance                      Colorless transparent liquidChemical basesα-Ethyl cyanoacrylateViscosity (mPa.s)(GB/T2794-1995)Brookfield RVT2#Rotor 20rpm4530-60Density (g/cm3)1.05(GB/T13354-1992)Flash point (℃)8880～93(SH/T0733-2004)Maximum filling gap (mm)0.1Fix time(s)Steel5～20Aluminum2～15ABS2～10Polycarbonate15～50Properties after curingFully curing time at room temperature(h)24Tensile shear strength(MPa)(GB/T 7124-1986)Steel15～24Aluminum11～20ABS4～15Polycarbonate4～15Working temperature (℃)-54-80Chemical/Solvent ResistanceAged under the following conditions and tested at 22°C.Solvent                     Temperature (℃)                          Initial strength remaining rate (%)100h500h1000hEngine oil40100100100Leaded gasoline23100100100Ethanol23100100100Isopropyl alcohol23100100100Ethylene glycol: water     23                                             100100100(1:1)Hot/Humid 95％40827675Application instructionTo achieve the best bonding effect, it is best to clean the surface before bonding, remove oil and impurities, dry it, apply the glue evenly to the adhered parts, and assemble it to theappropriate position according to the specifications. The liquidcan be dissolved and cleaned with acetone or ethyl acetate. Thisproduct is best for bonding parts with gaps less than0.05mm. To ensure that the system reaches the bestbonding strength and the adhesive layer has the best mediaresistance, it is recommended that the curing time be more than24 hours to ensure that the adhesive layer is completely cured.CautionsThis product does not have a good bonding effect on non-polarmaterials, such as polyethylene (PE), polypropylene (PP),polytetrafluoroethylene (PTFE), etc., and requires specialsurface treatment methods to achieve ideal bonding. Thisproduct cures instantly when exposed to moisture in the air.Please pay attention to safety when using it and avoid contactwith skin and eyes. After use, please close the bottle capimmediately to prevent the entire bottle of glue from absorbingmoisture and curing.PackageOrder code:740601,20g/bottle,10 bottles/BoxStorageThe best storage condition is in a cool and dry place at 3-8℃.The storage period is 12 months.Product codeAppearanceChemical baseViscosity(mPa·s)GB/T2794Maximum filling gap(mm)Tensile shear strengthMPa (steel-steel) GB/T7124Initial curing time(sec)Steel-steelFull curing time(h)Working temperature(℃)7401Colorless and transparentEthyl90~120*0.1512~181524-54~1207406Colorless and transparentEthyl15~25*0.115-201524-54~1207480BlackEthyl100~150*0.1518-2812024-54~1007495Colorless and transparentEthyl30~50*0.115-203024-54~1207496Colorless and transparentMethyl100-120*0.1516-254024-54~1207454Colorless and transparentEthylPaste0.2520-302024-54~120Note: *Viscosity – Brookfield RVF: *2#rotor 30rpm **1#rotor 30rpm