8902 PU Activator Used For The Surface Pre-Treatment Before The Adhesive Application To Increase The Bonding Strength

Huitian®8902PUActivatoris used for the surface pre-treatment before the adhesive application to increase the bonding of the adhesive.Typical ApplicationsThis product is used for cleaning and activating the surface of the substrate.For special materials, in order to ensure the bonding effect and the compatibility of products and materials, application tests should be carried out in the actual substrate and environment in advance. Please contact the technical service department of Huitian.Typical Technical data(real values may have deviations)ColorColorless to light yellow transparent liquidDensity, g/cm3, ASTM D 18750.69Flash point, ℃-4Operating temperature, ℃10-35Coverage (ml/m2)30-60Directions For UseUsage: Apply the activator to the part to be bonded and allow it to dry for about 3~10min (depending on ambient temperature and humidity);Optimal application environment: Ventilated environment at 15~25°C.CautionsKeep away from children for storage.This product contains organic solvents that are flammable and irritate the skin. Therefore, it should be kept out of the reach of children and away from fire, and smoking on the site is prohibited.If the skin is accidentally exposed to the product, wipe it with a cloth and scrub it with alcohol and other solvents before it cures.If the eyes are accidentally exposed to the product, rinse immediately with water, and seek medical attention.It is recommended that the product be used in a well-ventilated place.Please consult the MSDS of the product for safety information.Storage & TransportationRecommended transportation environmentOptimal environment: 5~25°C, <70%RH; avoid sunshine, rain, humidity, impact, and extrusion of packing.Recommended storage temperature5~25°CStorage environmentCool, dryShelf life9 monthsPacking Specification890204, 250ml/ can, 24 pcs/carton; 890210, 1,000ml/can, 8cans/cartonWaste DisposalIf not polluted by other substances, the waste can be stacked in landfills in principle and will not pollute water quality. Since the product can be burned, the waste can be disposed of in a waste incineration plant. Undoubtedly, it is necessary to abide by the environmental regulations of the local government.Health And Safety InformationBefore operating this product, it is necessary to get familiar with its hazards, proper use and disposal, and other relevant information. The following information may be useful: Material Safety Data Sheets (MSDS) and product classification marks. For more detailed information, contact your sales representative or technical service representative.Name890289068906P8906GCategoryActivatorGeneral PrimerBody primer (organic)Glass, electrophoretic paint, and other primersSubstrateCollocationGlass8902+8906/8906G+8960H/8965 (Conventional)8902+8906G+8960H/8965/8950 (Special solution for inorganicmaterials)Body8902+8906/8906G+8960H/8965 (Conventional)8902+8906P+8960H (Passenger car)8902+8960S/8966 (Passenger car body without primer)8906G/8906/8902 Huitian PU adhesive primer and activator and cleaner system!