RoomTemperature Use AB Glue For bonding the assembly of automotive materials

New Partner AB Glue has cured at room temperature fast and can be directly bonded slightly oily surface, repairing leaking oil tank parts, tanks, pipes, flanges, transformers, heat sinks and other equipment. Can also be used for metal, ceramic, plastic, wood and mutual self-adhesive sticky.Typical UsageFor bonding the assembly of automotive plastic panels, lamps, electrical housing, elevators, electrical and other industrial products.Technical DataProperties before CuringABAppearanceRedGreenMixing Ratio11Properties after CuringCuring TypeRoom Temperature Curing≥1.0Positioning time (25 ℃)5 ~ 8minTemperature ranges-55 ~ 120 ℃The maximum thickness of 0.2mm fillingTensile shear strength(Aluminum – aluminum)≥18MPaImpact strength≥1.0J / cm2180o peel strength≥2.3 N / mmPrecautionsthe product has acrylic glue characteristic pungent odor, which should be used with adequate ventilation.This product’ chemical reaction occurred after mixing intensely, the gel’s amount should not be too much, according to the amount of usage once the gel is preferably 2 ~ 20g.This product curing speed, should be used first piece is ready to be bonded, and construction should be completed after the gel is positioned within 3 to 5 minutes. This product is a two-component product, unused plastic cap should be covered seal, A and B plastic cap cannot be covered in a wrong way.Avoid contact of children eating the product.Safety precautions for this product, please consult the product safety data (MSDS).Application GuideClean all surfaces to remove oil, impurities, dried, glue AB new partner by volume of 1: 1 mix, spread evenly on being glued pieces, positioning and applying acupressure 8 to 10 minutes to reach the positioning strength, 2 hours You can reach more than 70% strength, 24 hours to complete the cure.Storage conditionsThis product should be in a cool, dry warehouse storage, avoid direct sunlight, the best temperature is 8 ℃ ~ 25 ℃. Unused glue should be sealed, so then the next. Highly contaminated glue bottle can reload the original packaging, so as not to affect the performance of the bottle remaining glue.AnnouncementsKeep away from children.If product touch your eyes carelessly, wipe your eyes with cloth before curing, then wash with water.If product touches your skin carelessly, flush with water immediately. We suggest using it in a placewith good ventilation. The product’s safety data please read MSDS as reference.Packing specification80g/box, 100 boxes/carton.20g/pack, 100packs/carton20g/box, 300boxes/carton