9335 Multi-Purpose Industrial Adhesive Glue, Neutral Cure Silicone Sealant For Doors & Windows

Huitian®9335is a general-purpose silicone construction sealant specially designed for sealing doors, windows, and internal and external wall joints. It has good adhesion to a wide range of doors, windows, and construction substrates, and is also suitable for general sealing, including glass, ceramic tiles, concrete, masonry aluminum, etc. It is a single-component, neutral curing, and does not corrode the substrate.ProductFeaturesOne-part, neutral curingGood extrudability and thixotropyExcellent adhesion to a wide range of substratesOutstanding weathering resistance, reliable long lifeEco-friendly, non-corrosive, non-irritating gasTypical ApplicationsSuitable for all kinds of doors and Windows installation, glass assemblySuitable for waterproof sealing of window sashSeam sealing for various other applicationsTypical Technical data(real values may have deviations)Sagging, mm≤2Extrusion, ml/min≥50Tack-free time, h≤48Density, g/cm31.23Tensile strength, ISO 527, MPa0.42Elongation performance after the Hot Air-Water CycleNo damageElongation performance after Water-UVIrradiationNo damageFlexibility at low temperature, -10℃QualifiedRecovery ratio after Hot Air-Water cycle≥80Tension – CompressionDurability grade8020Cycle performanceBonding failure area, %0*This product meets the standard: GB/14683 JC/T 485Directions For UseFirstly ensure that the contact surfaces are clean and dry. Remove rust, dust, oil, etc. If necessary, use solvents for cleaning and drying. Apply protective material to the area to be protected but do not touch the surface to be glued.Use a glue gun to squeeze the glue from the cartridge into the interface area.When corrections are required, it is important to do so before the glue has cured to ensure a flat and aesthetic appearance.Storage & TransportationRecommended transportation environmentOptimal environment: 5~27°C, <70%RH; avoid sunshine, rain, humidity, impact, and extrusion of packing.Recommended storage temperature5~27°CStorage environmentCool, dryShelf life12 monthsPacking Specification9335, 300ml/cartridge; 500ml/sausage; 590ml/sausageColorAvailable in different colors such as black, white, grey, and translucentCautionsKeep away from children for storage.If the eyes are accidentally exposed to the product, rinse immediately with water, and seek medical attention.It is recommended to use the product in a well-ventilated place.Please consult the MSDS of the product for safety information.Application limitsIt cannot be used as a structural sealant.Not suitable for use on all materials that leach grease, plasticizers, or solvents.e.g. surfaces of oil-impregnated woodNot suitable for use in closed, moisture-free environments, as the sealant needs to absorb moisture from the air to cure.Not suitable for use on frosted or wet surfaces.Not suitable for use in areas that are continuously flooded or wet all year round.User Guide:1. The substrate surface must be clean and free of oil and dust.2. Operation temperature 5-40 ℃3. This product is neutral curing, non-corrosive to substrate.4. Not for leaking grease, plasticizers or solvents occasion.5. The silicone sealant needs to absorb moisture in the air for curing, not good for an airtight case.Huitian is a total adhesive solution provider for the construction industry, including products for curtain walls, stones, insulating glass, doors, and windows.Huitian has a fully automatic production line for construction adhesives and the capacity can reach 300,000 T/Year.Huitian's construction adhesives have been widely used in big construction projects and are well-reviewed.Besides construction adhesives, Huitian also provides many other kinds of products for different industries, transportation, electronics, photovoltaic, etc.Huitian is your reliable partner and satisfies your need for adhesives!