Slightly Slump 9013 RTV Silicone Sealant / Adhesive (901HT) One component

9013 RTV Silicone Adhesive/Sealant (901HT)FEATURES9013 is a slightly clear, low modulus silicone adhesive/ sealant designed for applications where non corrosive cure and durable adhesion to a variety of substrates is required.One component adhesive/sealantCures at room temperature when exposed to moisture in the airOxime cure systemSlightly slump.Good adhesionExcellent dielectric propertiesStable and flexible form -60℃ to +200℃HANDING PRECAUTIONSProduct safety information required for safe use is not included. Before handing, read product and safety data sheets and container labels for safe use, physical and health hazard informationSTORAGEWhen stored at 8- 28℃ in the original unopened containers, this product has a usable life of 6 months from the date ofproduction.Special precautions must be taken to prevent moisture from contacting this material.Containers should b be kept tightly close.HOW TO USESurface preparation:For best adhesion, the substrate surface should be clean and dry prior to application. Some solvents can be used to clean thesurface.How to apply: Squeezing gel to the clean surface.Curing: 9013 is cured at room temperature by reaction with moisture in the air. Curing process takes place from the outside to the inside .A 2~4mm thick coating will be take place until 24 hours after coating (25℃,55%RH).PACKING STANDARD901304, 310 ml/cartridge, 25 cartridges/box