Power Supply Electrical Potting Compound Silicone 5295 high voltage potting compound

Main Applications1.For the deep potting of power supply and electronic components and parts.2.Specially suitable for the potting of inside and outside LED displays that request for flame retardance.ItemUnitTypical ValueColorComponent AGreyComponent BWhiteComponent of Basic MaterialsPolysiloxaneDensityComponent Ag/cm31.57Component B1.57ViscosityComponent AmPa*s3800Component B3600After Mixed3800Mix Ratio by weight (A:B)1:1Handing Curing Timemin85Initial Curing Timehour6Full Curing Timemin(80°C)25Thermal conductivityAfter CuringW/(m·K)0.63Dielectric constant1.2MHz3.0HarnessShore A65Volume ResistivityΩ*cm1.5x1014Dielectric StrengthKV/mm21Work Temperature°C-60~200How To UseBefore use, stir component A by hand or machine properly, keep component B sealed in the can and cut a proper hole at the sharp mouth of cartridge.Check whether it’s adhering to Applied Materials theoretically.Mix component A and B with the mix ratio A:B=1:1 by weight. Before hand simple tests are requested if you need to change the mix ratio.Natural defoamation or Vacuum defoamation. Natural Defoamation: mix component A and B, stewing 20-30 minutes. Vacuum defoamation: The vacuum degree 0.08-0.1Mpa.Vacuum pumping 5-10 minutes.Perfusion: Completed in Handing Curing timeCuring:Room temperature or heating curing. In winter, curing time is longer, so suggest heating to curing